Well the rails have been ready for a few days but today we actually mounted one side. The rails are 2x3x3/16 and the frames are 2x2x3/16. The front and rear brackets will bolt on but the middle is going to be welded (no good drilling locations).

I'll post pix as soon as their ready. Should be on by the weekend.

If your interested in a set, or in a 2x4 rear bumper with pull points and a hitch, let me know and we'll see what Aaron and I can fix up for you.

Latz!
Patrick

2000 Frontier CC 2wd
too many mod's to mention

BTW, here's what the rear bumper looks like...





2000 Frontier CC 2wd
too many mod's to mention

How much for the bumper. I need a new one anway. I could drive down to SA to pick it up.

I'm thinking around 200. I'll ask Aaron tomorrow. It required a little cutting - we used the stock bumper mounts but cut them off and welded the bumper to it and there are also a couple of additional braces where the spare used to go.

Let me know!
Patrick

2000 Frontier CC 2wd
too many mod's to mention

So the spare is no longer there? Can you take some pics of the underside?

Have you thought of adapting them to hold air?... for an onboard compressor,,, seems like a good option to design for aftermarket bumpers and such.

......................
1998 nissan

I'll take some pictures today and post them.

As for onboard air, I plan on getting an ARB air locker and their compressor but I don't know if they would really hold that much. Anyone have an opinion?

Latz!


2000 Frontier CC 2wd
too many mod's to mention

Take as many pics as you can. I want to see how far down it sits, and what the attachment points look like. I need one that is strong enough to drag around in the dirt and rocks. This will be a temporary fix until I build a flatbed eventually.

The pipe is actually bolted to a crossmember and welded to the bumper.



Simply cut the stock bumper bracket and weld it to the new bumper.

Let me know if you're interested!

Latz!

2000 Frontier CC 2wd
too many mod's to mention

Forgot to answer Bille...

I talked to Aaron today about that and are very seriously considering it.

Thanks for the option!



2000 Frontier CC 2wd
too many mod's to mention

damn, i need to get some sliders for mine......

GOT BOULDER??????????

i needed sliders last weekend....hehehehe

http://pub27.ezboard.com/btherealunnoficialnissanfrontiersite

Yeah, my rockers are trashed on both sides. One of these days I'm gonna make it to where the door won't open. This is a mod I really need to get done, but I want round tube to match my bumpers.


1998 Frontier 4x4 seriously built
2002 Xterra 4x4 still stock

andy, that is what i would like to do cuz I want to get tube front and rear bumper...... but doing custom tubular rocksliders is a bitch to do though......

that is why i might be stuck doing square tubing.....

GOT BOULDER??????????

That's why I'm going back to Hunter Offroad for mine.


1998 Frontier 4x4 seriously built
2002 Xterra 4x4 still stock