|
|
|
|
Nissan4wheelers.com Forum Nissan4wheelers.com Forum Frontier pacesetter is looking for a 98-00 frontier Topic Closed|
Go
|
New
|
Find
|
Notify
|
Tools
|
|
Pavement Pounder |
hello , i work at pacesetter and we are currently looking for a 98-00 2wd frontier , we need 1 to finish our proto typing our header
we would prefer the truck be stock , or as close to stock as possible on the exhaust we need the truck like yesterday , we are located in phoenix az , so if you are close please contact me at eremboldt@pacesetterexhaust.com |
||
|
|
Administrator N4W Card Holder  Arrr.. Me good eye! Ultimate N4Wheeler  |
4boldt4.. welcome to the board!
There are lots of phoenix guys on this board, so hopefully you'll get a truck quickly to get the header made. Post up some photos if you can when you guys get the header done. I'm sure people here will be interested, especially if it might be applicable to the 4wd trucks, which tend to crack manifolds all the time. ------------------------------------------------------------  <--Click Me!"As a lion is to a cat, so is a mastiff compared to a dog." "Those who would give up essential liberty to purchase a little temporary safety, deserve neither liberty or safety." - Benjamin Franklin |
|||
|
|
Pavement Pounder |
our 4wd header is done for the 98-00 , we are just waiting to see if the 2wd will need any changes to the 4wd to work
after these are done we will be doing the 01-up frontiers |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler  |
I'll be contacting you!!!
When/where can I buy the header?  1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
And this is for the 4 banger, correct?
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
Moderator N4W Card Holder Ultimate N4Wheeler  |
I very much want a headder for my 2wd 4cyl... I am in Tucson tho. How long would you need the truck? Would a weekend work?
-----------------------------  My myspace page. TUPPERWARE!!!! "Never argue with an idiot, they will just drag you down to their level and then beat you with experience." |
|||
|
|
Administrator N4W Card Holder Arrr.. Me good eye! Ultimate N4Wheeler |
Greg.. the only problem is that they need a stock or near-stock truck. Yours has a bodylift, which probably wouldnt work for prototyping header for a stocker.
 ------------------------------------------------------------ <--Click Me!"As a lion is to a cat, so is a mastiff compared to a dog." "Those who would give up essential liberty to purchase a little temporary safety, deserve neither liberty or safety." - Benjamin Franklin |
|||
|
|
Pavement Pounder |
we are only open week days , we only need the truck for a day
and any of our retailers will be able to get the headers , these are the asigned part #s right now , retail is set at 260.00 70-1196 is for the 2wd 70-1199 is for the 4wd once we get the 2wd's final testing done , i can let you all know when the 4wd and 2wd will be avaliable yes they are for the 2.4 4 cyl |
|||
|
Ultimate N4Wheeler |
will they be "equal length" or as close to that as possible? 3/8" flange? CArb approved?
( doubt the last one,  but a guy can hope can't he?)..................... "Climate change is no longer science. It's politics... Climate change is also about power. Power to control.... It's about who gets to decide: how much energy we will have... where that energy will come from... what it will cost... It's about simulations, scenarios and monsters conjured up by computer models that should never be used to chart government policy -- especially on matters that will profoundly affect our livelihoods, living standards, life spans and dreams of a better future. "So hold onto your wallets, and hope you can hold onto your homes, cars and jobs. You're about to be put on a wild political roller coaster." - Paul Driessen, TownHall.com ( the lies of global warming)> http://www.youtube.com/watch?v=-zeGY8zbzc8 |
|||
|
|
Pavement Pounder |
im not sure on the equaly or near equal length , i havent actually seen the header yet , i wasnt here the day they made it
and for the CARB approval , we are going to be working up to it , but i can not say when it would happen |
|||
|
|
Pavement Pounder |
opps forgot the YES to the 3/8" flange
|
|||
|
Wheeler |
Sorry for the post jack, but are there any plans to address the pathfinder header fit issue?
|
|||
|
Rock Crawler |
how about a v6 header?
 |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
Does the O2 sensor thread in?
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
Wheeler |
I have a 240sx pacesetter header on my 98 frontier. I had to thread in an old O2 sensor to plug up the second hole, and bend it a bit to keep it away from the torsion bar, but other than that it fits great.
01 Xterra v6, 3-pack, 3.5" lift on 32's 98 Frontier RC, heavily modified on 33's 1969 KL60 Patrol 1991 Pathfinder SE 4x4, being parted out |
|||
|
| Previous Topic | Next Topic | powered by eve community | Page 1 2 3 4 |
 | Please Wait. Your request is being processed... |
|
|||
| Site | Nissan4wheelers.com Forum | ||
| Servlet | eve1da002 | ||
| Version | 1.3.0 build 9368 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Default Style" | ||
| Wordlet Set | "Default Wordlet Set" | ||
Topic Closed Nissan4wheelers.com Forum Nissan4wheelers.com Forum Frontier pacesetter is looking for a 98-00 frontier