|
|
|
Topic Closed|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
|
New Member |
I have a 2001 Frontier 4x4 and the I went to use the air conditioner and when i turned the fan on it only works on high (3 setting) both for the heat and the air conditioner. would it be the switch? if so how do you get at it?
|
||
|
|
NISSAN4WHEELER |
This has been brought up several times in the past. Do a search (Find in the toolbar) and you should find something.
To the best of my memory there are two issues, 1. the contacts are dirty and need to be cleaned (Good News) 2. There was a problem with the entire mechanism and needs to be replaced, although I thought this was only on 99-2000 model years. (Bad News) ---------------------------- 08 Titan 4x4 03 Frontier 4x4 05 Quest |
|||
|
N4W Card Holder![]() Wheeler |
yep revan's is right it was brought up not long ago and those were the two thing's determined to fix it...
1991 HB with lots of mods on the way 1999 sheep cherokee 4.5" rustys S.L. lift,Flowmaster exhaust,tbs,and some eagle alloy wheels for "bling" on 31's |
|||
|
|
Administrator N4W Card Holder ![]() Ultimate N4Wheeler |
There's a fan motor resistor under your dash over on the passenger side...about a $20-25 part from the dealer. Replace that and your fan will work normally again.
Very common problem. 1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
New Member |
Hi N4W,
Thanks for the info. Where abouts on the passanger side is this relay and what and do I have to disassemble to get at it...tks Dave |
|||
|
|
Administrator N4W Card Holder ![]() Ultimate N4Wheeler |
Look around for it...it's a card looking thing about half the size of a computer sound card or modem. It's easiest to buy the part and then you know exactly what you're looking for.
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
Topic Closed
