Does anyone know which wire/pin at the ecu is the OX1 wire (o2 sens), or have wiring schematics for a late model frontier (KA24DE). I bought an A/F gauge and it is collecting dust because I don't know where to tie my signal wire to inside the cab. The FSM is not available for the '01-'02 model years yet and I am not nissan familiar enough to know changes from past models, but if anyone knows off hand I would greatly appreciate it, I really don't want to break loose all the split-loom to track it down.
Give the laziest man the hardest job and he will find the easiest way to do it.
On my '99 FSM schematics it shows as a black wire pin 50. Use Pin 32 for engine running ground to check voltage, it varies between 0-1.0 volts when engine is running and fully heated up. I would see if you could double check with a dealer to ensure these pins haven't changed for newer trucks before sticking a voltmeter in there however.
...needs another axle to power, care to send me one?
Posts: 558 | Location: Raleigh, NC, USA | Registered: July 20, 2002
N4W follows the Tread Lightly philisophy and asks that members do the same. Let's keep our trails open! For more information on Tread Lightly, visit their website!
