Ok. I'm going to get rid of this annoying piece of metal and make it into a coat rack for the garage.

Anybody found any better use for this thing?



"Know what I would do if I had a million dollars... 2 chicks at one time..."

They make really cool walking canes if you put a rubber ball on the bottom and duct tape the top.


1998 Frontier 4x4 with ALL the goodies!
2002 Xterra 4x4 still stock
Grow the Nissan Community and stand up for ORV user rights!

pull up bar in the garage rafters.

DR, after seeing all the pics of your "sideways" meany, you may be the only one here that actually needs a walking cane...

"Know what I would do if I had a million dollars... 2 chicks at one time..."

i took off my front sway bar...in july...and its been in the bed of my truck ever since...i guess im afraid ill want it but i know i just dont have the guts to toss it...and after i put the body lift on there has been a cinder block and a gas can rolling around back there....no ones stolen it yet...im surprised

Mine's been off forever.....and I have the cane!!

i took of the rear one today on my 88 pathgrinder. i bent the left endlink friday night. did not notice a huge difference with
it off. i just take it easy while cornering.

how much different is it with the front one off?

Both my front and rear ones are gone.

Front one is also in the bed of the truck,

It makes u-turns and parking lot ralleys fun You can three wheel without hydrolics, haha

-----------------------------

1999 Nissan Frontier 2wd King Cab
H233B Rear Axle swap
Custom bumper and sliders.
home page
pictures

Sway bar? What is that? I think I recall something like that being under my truck but... it's gone now!

----------------------
1994 Hardbody Reg. Cab

I'm now taking donations for the Calmini Steering. Send all your cash to...

heres a question, with the weight of my bumper and winch like 400 pounds or so is it ok to take my sway bar off?

2000 R/C 4x2 2.4L Frontier
Fabtech 3.5" Suspension Lift
BFG All Terrain 31x10.5x15
Custom K&N Air Intake
Flowmaster "50" Series Exhaust
ARB Bullbar
Warn 9.5T Thermometric Winch
KC Daylighters
revans@bech.com
AOL Screename = revans2003

John (Datz510) has an ARB bumper and winch on his pathy, and he runs withought sway bars...

-----------------------------
1999 Nissan Frontier 2wd King Cab
H233B Rear Axle swap
Custom bumper and sliders.
home page
pictures

cool cause its much easier to change my oil filter without it.

2000 R/C 4x2 2.4L Frontier
Fabtech 3.5" Suspension Lift
BFG All Terrain 31x10.5x15
Custom K&N Air Intake
Flowmaster "50" Series Exhaust
ARB Bullbar
Warn 9.5T Thermometric Winch
KC Daylighters
revans@bech.com
AOL Screename = revans2003

Actually, bumper and winch are about 225lb in my case. Still very heavy..

I am running without swaybars.. but have stiffer torsion bars and stiffer rear springs. I still drag doorhandles when cornering though, so you just have to be very careful.

----------------------------
BEEFYJames Fabrication - Custom Fabricated for Use and Abuse
Nissan Terrano .. "Take a grip of Steering!"

your probably right but thanks i will try it this weekend.

2000 R/C 4x2 2.4L Frontier
Fabtech 3.5" Suspension Lift
BFG All Terrain 31x10.5x15
Custom K&N Air Intake
Flowmaster "50" Series Exhaust
ARB Bullbar
Warn 9.5T Thermometric Winch
KC Daylighters
revans@bech.com
AOL Screename = revans2003

Honestly, I'd ask what the point is on removing it on a 2wd. The greater articulation keeps the front wheels on the ground. With no power going to the front wheels, what does it matter?


1998 Frontier 4x4 with ALL the goodies!
2002 Xterra 4x4 still stock
Grow the Nissan Community and stand up for ORV user rights!