I have a 94 Pathfinder I already have a 3" suspension as well as a 3" inch body lift and am currently running 33" TSL Super Swamper radial tires. I have seen pathfinders up much higher with
much bigger tires and I want some advice on how to make it bigger. I know the first thing I need is a solid front axel but I don't know how to go about doing that and where to go from there. Please
Help!

If bigger is all you want, go for the 4" Trail Master lift, it will get you 4" higher than you already are and give you plenty of room for 35's. I solid Axel is not real practical unless you are really into 4 wheeling. It will cost a lot more money and you will sacrifice a lot more road manners as well. Good luck with the Pathfinder

Yep...I agee with Orange...

'95 Pathfinder XE
33x12.5-15 Kumho Venture MT
2" PA Body Lift
Ford coils in rear
New UCA's in front
Rancho 5116 rear
Rancho 5119 front
Manik Brush Guard
15x8 Borbet CW4

There was a Pathy somewhere around here that was for sale at one time that had a 6" lift on it like the TM lift. I was from New York I remember and it was a custom lift. Check with your local 4x4 shop and see what they can do for you. But for just bolt on stuff, the TM is going to be your only answer.

I think I saw that one for sale on E-Bay. Had a custom 6" suspension lift that was all yellow? He was asking quit a bit for it!!

'95 Pathfinder XE
33x12.5-15 Kumho Venture MT
2" PA Body Lift
Ford coils in rear
New UCA's in front
Rancho 5116 rear
Rancho 5119 front
Manik Brush Guard
15x8 Borbet CW4