ok my problem is i have am 89' nissan that i bought at a sale for $100 and the only lifts i could find were well over $300 so i was thinking of doing a spring-over convertion should i go aheard and do it? also my other problem is how would i lift the front to be level w/ the back p.s. im only 14 so i still have 2 years to work on it

By spring over conversion, I'm going to guess you mean Ford coils. The cheapest lift for the front to match that would be ball joint spacers (www.4x4parts.com sells them for about $90) and a torsion bar crank.

Your other option is to do a body lift and leave the suspension alone.

P.S. Capitalization and punctuation would make your post much easier to read.

No, by spring over conversion he likely means that it is a 2WD Hardbody Pickup.

Well for lift options, there isn't a whole lot. If you do a spring over you will likely gain about 4 or 5 inches of lift, which you won't be able to get from any kit for the front.

I would sooner recommend some other way of lifting the rear, coupled with a lift kit for the front, or there is always the option of a body lift.

By the way, welcome!

----------------------
1994 Hardbody Reg. Cab

I'm a "bolt on baby", tough sh*t! Deal wit it!

body lift...my last truck was a 93 2wd with 3inch BL and 30 inch tires...lots of offset 30 was all I could fit...anyway it looked good and didnt throw off the suspension any. Let me see If I can find a pic to scan.

My truck is a 2wd as well.

I have done a 3 inch Body lift, and added 31 inch tires with 3.75 in offset wheels... no rubbing. I recommend a Body lift for a *cheap* lift (around 250 or so).

-----------------------------

thanks for the tips and yes it is a 2wd. ill lookin to gettinm a body lift and get some pics to show the progress