|
|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
New Member |
I have been able to put a t2 turbo on my ka24e 91 4x4 hardbody I fliped the manifold and made this set up from an idea i had.. it worked. still putting it together. how many lbs of boost can i run on this motor and what about fuel..
thanks Seanpic of the turbo on myspace |
||
|
Wheeler![]() |
haha thats sweet! stock you can probly hold up to about 7psi and fueling im not to sure your stock injectors I imagine should be fine as long as you keep the boost low
|
|||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
|
|||
|
|
New Member |
i juat gooked up boost got 5 lbs runs killer on top end but idles like crap soemthing bout maf.. any ideas>>
|
|||
|
Wheeler![]() |
have you had it tuned to the turbo yet that should help a bit
|
|||
|
|
New Member |
LOL tuned! i do that by ear! lol im stillworking out the bugs. there is no one in my area thats into nissan it sucks!
|
|||
|
|
Dirt Road Driver |
Try picking up the ECU out of an automatic 240sx, larger injectors, and I believe a 60mm MAF instead of the stock 56mm MAF. The automatic 240sx ECU has a more aggressive timing, as well as pushes a bit more fuel at the low end which should help the idle.
|
|||
|
Wheeler![]() |
Try looking for KA24ET Nissan never produced it as an enginge but they made a turbo kit so that ppl could convert to it.
=================================== mostly stock(for now) '89 Pathfinder XE over 210k and running good! Thorley Headders & Magnaflow High Flow Cat w/ 2" turn down in rear wheelwell. |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

