Over the last weekend the super sucky stock pathy went up. I don't know what the ride height was before, and I don't know what it is now but the tires fit. That is what I was looking for.
I installed coil springs from a '96 JGC (ordered from summit), Sway Away torsion bars and 1" balljoint spacers, from AC, I also put some bushings on the tension rods and greased the truck.
The tires are 33" 12.50 on 15 inch wheels, The front wheels are stock '79 Land Crusier, and I don't know what the back wheels are they came with my buddies LC.









Now for the good stuff.

That's a sweet lookin' FJ behind you, got any other pics?

J/K your Pathy's looking right now. Did you cut the wells back after removing the fenders?

quote:

Originally posted by DBAX:
That's a sweet lookin' FJ behind you, got any other pics?

Oh, you had me going with that one. I was all ready to rip into you.

-Spike (Kinda ironic, dontcha think?)

Looks sweet...just keep an eye on you upper control arms as Ive heard of cracks developing with the use of the BJ spacers but theay may have been an issue with the larger ones... or I might be be posting out-a-my-a$$.

You know that now you have started modifications you will never be done. there is alway one more mod that you want to add or do. Looks very nice, keep up the good work.

I do have more pics of the FJ it is my buddies, but I won't post them this is for nissans.

quote:

You know that now you have started modifications you will never be done. there is alway one more mod that you want to add or do. Looks very nice, keep up the good work.

quote:

Yeah I have a lot more to do now. I actually have to lower it in the front about an inch so it is level. The back end settled down some. It is actually good that will bring the UCA's up some and tip the tires out more. The only problem is that I will have to unindex the torsion bars some so the hangers stay up in the cross member.

quote:

Did you cut the wells back after removing the fenders?
[QUOTE]

Yes I took a lot of metal off of the fenders, I didn't mean to but I ended up in the body in the rear. So I have some sheet metal work to do. I filled everything with spray foam for now, I think I have enough in there to float the truck.