Finally, my snorkel just arrived. I guess it is exactly like your's John.

Hey John, when would you be able to give me a hand with it?

Man!!! i'm so exited!!


http://www3.gratisweb.com/checoyroxy/ChecoyRoxipink.html
"Even if you are on the right track, you'll get run over if you just sit there." - Words of Wisdom

Checo,

Congrats man and welcome to the few, the proud, the ones with Snorkels!

I don't know if you guys know about the hole in the bottom of the airbox or not but be sure to completley take your box out and check it for holes.....HA! No seriously, you can plug it with a 1/4 inch bolt and RTV sealant.

Let's see some pics when it's done

MVM



######################
Under Construction and Over Budget

Thanks bro!

I'm defently posting pics when I'm done. Also, I'm probably taking the whole airbox out. Dunno!


http://www3.gratisweb.com/checoyroxy/ChecoyRoxipink.html
"Even if you are on the right track, you'll get run over if you just sit there." - Words of Wisdom

SWEET!!! yeah, I'll help you. When do you want to do it?

---------------------------


"I'm just a bill... on Capitol Hill.."

When ever you have time!


http://www3.gratisweb.com/checoyroxy/ChecoyRoxipink.html
"Even if you are on the right track, you'll get run over if you just sit there." - Words of Wisdom

way to go sergio......

i am anxious to see you have it on....




GOT ANY BALLS??????????

Hey speaking for snorkles had anyone used a snorkle from a different truck like a Frontier one on a HB or pathfinder. I like the look of the Frontiers and X-terras snorkle with the ram air head on it.

Black 95 Pathfinder XE
2" PA Body-Lift
1.5" Ball Joint spacers
77 Bronco 2.5" lift coils
Rancho 9000's
32x11.50 BFG AT KO's
Rock sliders
Rack lights etc etc..

Homepage: http://www.cardomain.com/id/shadowman2k

I havent seen anyone do it. It might be kinda difficult because the snorkels are formed to fit the curves of each truck.. and the snorkel plastic is TOUGH stuff.

---------------------------


"I'm just a bill... on Capitol Hill.."

You could always make your own "low-buck" snorkel and face it towards the front for the ram-air effect. I can't remember where I saw a write up on this maybe on www.pathfinderoffroad.com

-------------------------

Robbie (aka cruisearound) did a writeup on it. Cant remember where it is though.

---------------------------


"I'm just a bill... on Capitol Hill.."

here it is...

http://www.pathfinderoffroad.com/tech/snorkel.html

-------------------------

Ya I know I could do that but I would rather have the safari snorkle it is already prefabbed. I think in the long run it would cost about the same to get a used snorkle off someone rather than make one. I can say though Rob's snorkle does look good though.

Black 95 Pathfinder XE
2" PA Body-Lift
1.5" Ball Joint spacers
77 Bronco 2.5" lift coils
Rancho 9000's
32x11.50 BFG AT KO's
Rock sliders
Rack lights etc etc..

Homepage: http://www.cardomain.com/id/shadowman2k

I was thinking the same thing originally, fab my own, but then the opportunity came to buy a new snorkel from someone who never used it. They is the only reason I got my and because I looks very cool!


http://www3.gratisweb.com/checoyroxy/ChecoyRoxipink.html
"Even if you are on the right track, you'll get run over if you just sit there." - Words of Wisdom

I checked www.4x4connection.com sells the ram air head for the safari snorkle but it is $70. Just FYI in case you decide to get it. I like the look of the ram air intake. They also sell the pre-air cleaner for $70 too.

Black 95 Pathfinder XE
2" PA Body-Lift
1.5" Ball Joint spacers
77 Bronco 2.5" lift coils
Rancho 9000's
32x11.50 BFG AT KO's
Rock sliders
Rack lights etc etc..

Homepage: http://www.cardomain.com/id/shadowman2k

I don't think that replacement piece they have will attach to the snorkel I have. This particular snorkel is one-piece.


http://www3.gratisweb.com/checoyroxy/ChecoyRoxipink.html
"Even if you are on the right track, you'll get run over if you just sit there." - Words of Wisdom