|
|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
Wheeler N4W Card Holder ![]() Overlander ![]() |
Anybody gottent the 2" BL for a 97 nissan? I currently see that only the 3" BL is available. AC guys told me that I could use the 2" BL from the older model HBs.
Anybody know what parts are included in the 2" BL for HBs? My biggest concern is the drop-down brackets for the radiator... |
||
|
|
Administrator N4W Card Holder ![]() Ultimate N4Wheeler |
Mcfly runs a 3" BL on his heap Pissfinder. Not sure if he had to relocate the radiator or not.
Mikey? 1998 Frontier 4x4 seriously built 2002 Xterra 4x4 still stock |
|||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
We did a 3" on DocP's and we just got rid of the whole shroud and didn't move the rad.
The kit came with a whole bunch of parts that we didn't even need, including parts for 2wd trucks...so don't worry about parts Mr. Will |1992 SE-V6 4x4, 2001 LE 3.5| http://www.netsnapshot.com/pcw/pickalbum?W92PathSE |
|||
|
| <GreenHBody>
|
But, would a 2" work on a 94 and up Hardbody? What parts would it be missing, in other words what is different about the 93 and 94? Only reason I'm asking is because I've heard that the 2" is alot easier to install than the 3.
|
||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
Pathfinders changed after 92 and stayed the same til 95. I would assume that the HB did the same.
If this is true, the lift would be no different from 93-94. I would say that the 2" would be easier. We had to buy some new rad hoses and a couple other things for the 3". I'm willing to be that you wouldn't need to buy anything extra for the 2"...but make sure you got an extra car just in case DocP's lift was a PA lift bought through AC. He has a 95 SE. Mr. Will |1992 SE-V6 4x4, 2001 LE 3.5| http://www.netsnapshot.com/pcw/pickalbum?W92PathSE |
|||
|
|
Administrator N4W Card Holder ![]() Arrr.. Me good eye! Ultimate N4Wheeler ![]() |
|
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

