|
|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
|
Pavement Pounder |
I'm looking for some good all terrain tires on rims for my '95 XE 4x4 pickup.
Besides Nissan, what other manufacturers' rims fit on my truck? Toyota? Chevy? Dodge? |
||
|
|
Off-Road Warrior |
Any 6 lug will prettty much fit, Toyota, etc..
============================== 1995 HB XEV6 4x4, AC Susp. Lift, 3" Body Lift 33" BFG AT's Custom Sliders, Steering, Roof Rack, Rear Bumper and Skids. MOBI-ARC Underhood Welder -------------- 2004 Xterra 4x4 Custom skid plates |
|||
|
|
Wheeler |
I've thrown on yota rims and they fit fine........
|
|||
|
|
Wheeler N4W Card Holder ![]() Overlander |
I don't think Dodge fits...
|
|||
|
|
Rock Crawler |
Yah, Chevy is too small a center bore, and I don't know if Dodge fits at all.
You can find the older larger-bore Isuzu wheels (Trooper, Rodeo) that fit too. ----------------------------------- When did you last check your spare tire's pressure? |
|||
|
Overlander![]() |
..
... The Full Size Jeep (6 on 5.5 15x8 /BS 3.625) wheels can be mounted on some Nissan and Toyota 4x4s. The Nissan wheel-centering hole is smaller than the FSJs. Measure the center of the Jeep hub and it is about 4.200 inches. FSJ wheels have been successfully run on Nissans but careful attention must be paid to wheel nut torque and tightening sequences because the centering hole is too large. ... The Nissan centering hole is 3.925 inches in diameter so the Nissan wheels holes would have to be turned to a larger diameter for use on older Chevy and Full Size Jeeps. Some of the Nissan wheels may not fit over or clear the brakes but some will as they have a variety of BSs and over all diameters. 1999 Frontier wheels are 6 on 5.5-15x7 and 5.250 BS... Have a good one '99 4x4 3.3 KC & '04 Sentra 1.8s '99 4x4 4.7 WJ & '76 4x4 FSJ 401 |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

