Recent Posts New Posts Tools Board Menu
    Nissan4wheelers.com Forum    Nissan4wheelers.com Forum  Hop To Forum Categories  Hardbody    power windows
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Pavement Pounder
Picture of Type Gendy
Posted
The power windows in my 95 sev6 seem to have a slow / dead spot halfway up. When i go to put them up they kinda slow down and hang up right in the middle... anybody else have this problem and know what the issue is?
 
Posts: 38 | Location: tech help | Registered: September 18, 2007Reply With QuoteEdit or Delete MessageReport This Post
Off-Road Warrior
Picture of KDawg
Posted Hide Post
All I can tell ya, is that my '01 Fronty does the same thing, but it only does that on the front pass. door, and the rear driver's side door. Weird, I know. If you figure it out, let me know, though I'm almost positive you should just go out and get a new window motor or regulator. (or something of that nature) Hope this helps. Later... Chug



My Web Page
My YouTube site
38,000 miles and counting.
"Man who stand on toilet, is HIGH on pot" - Confucious
 
Posts: 1199 | Location: Johnstown, PA | Registered: October 14, 2002Reply With QuoteEdit or Delete MessageReport This Post
Pavement Pounder
Picture of Type Gendy
Posted Hide Post
Yea that is pretty odd...glad i'm not the only one with the problem.

I figured it might be time for a new motor and regulator but wanted to be certain before spending the time and money
 
Posts: 38 | Location: tech help | Registered: September 18, 2007Reply With QuoteEdit or Delete MessageReport This Post
Dirt Road Driver
Picture of ZmagDnim
Posted Hide Post
I too have a problem with the passenger side window being slower then the rest. My buddy also has the same problem.


2002 Frontier, SC, CC, 4x4. AC UCAs, AC 3-pack AALs, Calmini Shocks, L&P Stage 3 Steering, Shrockworks Front Bumper, 32"x11.5" BFG MTs, 15x8 Soft 8s.
 
Posts: 71 | Location: Southern Maryland | Registered: June 03, 2006Reply With QuoteEdit or Delete MessageReport This Post
NISSAN4WHEELER
Picture of LordBiotree
Posted Hide Post
you can take out the door panel and grease all tracks up. chances are the motor is wearing out.


1995 KC XE-V6 4x4.
 
Posts: 4593 | Location: U.S.A,Tallahassee/Jacksonville, Florida | Registered: June 17, 2003Reply With QuoteEdit or Delete MessageReport This Post
N4W Card Holder

Off-Road Warrior
Picture of danielmid
Posted Hide Post
A good test is to see if there is a speed difference between the drivers side master panel, and the door switch itself. The contacts on the switches (both the master and the door) have a tendency to wear out over time. My passenger window has stopped all together till I can pull the switches apart to check for issues. I would check this first before pulling everything apart, but cleaning and greasing the track couldnt hurt a bit either.


Daniel

1999 Frontier XE 2WD I4 AUTO - RIP sold 11/01/05
1994 Pathy XE 4WD V6 5 SPD - Bought 1/29/06
 
Posts: 1203 | Location: Being a Bumville, AZ | Registered: December 25, 2004Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

    Nissan4wheelers.com Forum    Nissan4wheelers.com Forum  Hop To Forum Categories  Hardbody    power windows

© Nissan4wheelers.com 2002
Copying/Reproduction of any information or Photographs/Images Prohibited without prior written permission from the Administrator

N4W follows the Tread Lightly philisophy and asks that members do the same.
Let's keep our trails open!
For more information on Tread Lightly, visit their website!