Recent Posts New Posts Tools Board Menu
    Nissan4wheelers.com Forum    Nissan4wheelers.com Forum  Hop To Forum Categories  Hardbody    from 1987 to 1997 Front Bumper
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
New Member
Posted
is there any difference on the front end with brackets for the 1987 and 1997 front bumper, when i baught my 87 i did not like the black bumpers so i went and baught a new front bumper assy thats chrome and i baught the rear also,i allready put the rear on and im planning on putting on the front but someone said the front end might be different and it might not work? what do u guys think/

my radaitor support is pushed back from a prior collision hack repair so im having a bodyman at work replace the radiator support in 2 weeks and if the only difference is the rad support then ill just get a 97 support

also is the frame on the 87 4x4 pathfinder and hardbody the same on the very front rail section because i need the LT Front section of the frame to section in and theres plently of pathfinder 4x4 ve suvs in the junk yards in town


1987 KING CAB HARDBODY V6 4X4 5SPD
 
Posts: 18 | Location: ORLANDO FL | Registered: May 19, 2008Reply With QuoteEdit or Delete MessageReport This Post
Wheeler
Posted Hide Post
front end brackets are differnt. I gave a guy my old chrome bumper and he said it didnt fit.


 
Posts: 119 | Location: napa Ca | Registered: July 01, 2002Reply With QuoteEdit or Delete MessageReport This Post
Dirt Road Driver
Picture of david29
Posted Hide Post
If you got a 97 bumper for your 87, you have to change brackets. The frame mounts are the same on both. Just get the 97 brackets for the new bumper.


I have an '89 Nissan Hardbody King Cab with a Chevy truck/Blazer 4" suspension lift and 3" body lift. It will soon have a TBI 350, SM-465 4 speed trans and 208 T-case rounded off with 39" tires.

 
Posts: 97 | Location: Spring(Houston), Texas | Registered: February 16, 2005Reply With QuoteEdit or Delete MessageReport This Post
New Member
Posted Hide Post
thats what i did, i baugt a entire front bumper assy with all new hardware and its out of alignment, i might have some frame damage, ill get it up on a frame machine and see

thankyou everyone for the info


1987 KING CAB HARDBODY V6 4X4 5SPD
 
Posts: 18 | Location: ORLANDO FL | Registered: May 19, 2008Reply With QuoteEdit or Delete MessageReport This Post
NISSAN4WHEELER
Picture of LordBiotree
Posted Hide Post
Nissan did change the design of the bumpers from the D21 to the D21U. However I'm sure you could make the new bumper work, might have to make your own brackets.


1995 KC XE-V6 4x4.
 
Posts: 4593 | Location: U.S.A,Tallahassee/Jacksonville, Florida | Registered: June 17, 2003Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

    Nissan4wheelers.com Forum    Nissan4wheelers.com Forum  Hop To Forum Categories  Hardbody    from 1987 to 1997 Front Bumper

© Nissan4wheelers.com 2002
Copying/Reproduction of any information or Photographs/Images Prohibited without prior written permission from the Administrator

N4W follows the Tread Lightly philisophy and asks that members do the same.
Let's keep our trails open!
For more information on Tread Lightly, visit their website!