HELP How much lift to fit 33-12.50 on my 02 xterra.

3 inch suspension lift and some fender trimming..

thanks stone how much trimming with 2 inch BL. its for the wife and I want to look good

for the 12.50, i've only seen that work on trucks with a suspension lift AND a body lift, as well as trimming to the rear side of the front fenders including the plastic lop where the mudflap used to be, the fender itself, and the body seam. Underneath where the fender bolts to the body seam, you can see the fender bolt. You can grind back almost that far. And angle grinder with a cutoff wheel works well here.

Good call DR, I was thinking the same thing. On my '01 Fronty, to fit 33's, I had to get a 3" SL, as well as a 2" Body Lift. And I think after that, I even had to trim a little off of the fenderwell opening near the firewall side. (mostly just the mud flaps OR I just removed the front mud flaps) Hope this helps! Later...

Thanks guys I am not to crazy for body lifts so 2 inch and Lil trimming it is.

33x10.5x15 fit a whole lot easier.

I have a set of 4 with 99% wend I went to 35s on my jeep.