|
|
|
|
Go
![]() |
New
![]() |
Find
![]() |
Notify
![]() |
Tools
![]() |
Reply
![]() |
|
| <jared 87>
|
A friend of mine has a CB that looks like it would fit perfectly in there, anyone do this?
|
||
|
|
Wheeler |
I looked into this once, on my 87, theres not enough depth for the cb i had.
[]/ \[] to []---[] soon |
|||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
|
|||
|
|
Dirt Road Driver |
I have a cheap wally world one (35$) mounted where my ash tray used to be
Chicks Dig body damage MOFO member #2 http://www.forumer.com/mofo/ 99 XE K/C, 31x10.50 BFG A/Ts, Mussa brush guard, K&N drop in, herculined rockers, and more on the way. |
|||
|
|
Dirt Road Driver |
What kinda vehicle do you have? I have a 2000 Frontier CC. Like A1C, I was able to get a Radio Shack CB in there. Fits like a glove and sounds decent too. I'll see if I have a pic around of it.
2000 Frontier CC 4wd |
|||
|
| <jared 87>
|
87 pathfinder
|
||
|
|
Dirt Road Driver |
Stromtrooper, I would like to see a picture of it. I have a 95 Hardbody and have heard some people say you can mount a CB under the radio. Anyone here done that, if so, what CB fit and do you have any pics of it.
Thanks, Jeremy 1995 Hardbody KC 4x4 SE-V6 |
|||
|
|
Dirt Road Driver |
I mounted mine underneath the radio. Only way I could get it in the car without it looking crappy. Most cb's come with mouting hardware and just screw the brackets into the plastic under the radio. Check the pictures on my site on page 4.
|
|||
|
|
Wheeler |
I have a a 01 Crew Cab..I mounted mine in place of the ash tray. It took some dremeling as someone else stated.but fits tight, and works well...I can get a pic later
Brad B. '02 Jeep TJ on 35's |
|||
|
|
Dirt Road Driver |
Sorry for the delay but here's the pic...
2000 Frontier CC 4wd |
|||
|
|
Wheeler |
thats exactly what mine looks like....
Brad B. '02 Jeep TJ on 35's |
|||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
Off topic...
How do you like that RS900 in cab controller? Is it worth the investment? ----------------------------- My myspace page. TUPPERWARE!!!! "Never argue with an idiot, they will just drag you down to their level and then beat you with experience." |
|||
|
|
Dirt Road Driver |
Hmmm, how do I answer that? Yes I absolutely love it! Did I install it? Yes I did. Would I do it again? Ummm, I don't think I'd want to install it again but I'm sure I could do it better the second time. Lots of hoses going everywhere!
2000 Frontier CC 4wd |
|||
|
|
Wheeler |
Gotta question for ya'll.
Anyone get interference noise thru their CB from powerlines..?? Im sure they have to take it per FCC regs..but its annoying. I pass under 3 large sets on the way to work....Ive checked all the cabling and grounds... Brad B. '02 Jeep TJ on 35's |
|||
|
|
Moderator N4W Card Holder ![]() Ultimate N4Wheeler ![]() |
|
|||
|
|
Overlander |
|
|||
|
|
Wheeler |
thats what I was thinking...but never heard anyone mention it..thx
Brad B. '02 Jeep TJ on 35's |
|||
|
| Previous Topic | Next Topic | powered by eve community |
| Please Wait. Your request is being processed... |
|

