|
|
|
|
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
Wheeler |
wow, thats a great idea. i've been thinkin about making some type of box to seal up my ecu... could you post a pic of yours? if do end up doing that, i would definitly make a little black box like that. would it work the same way on a 94 with a 2.4L?
|
|||
|
|
Pavement Pounder |
Hey! I built a box per the specifications, and tested it with a benchtop supply here at work, but It does squat when in the truck. How long did you have it run before it started giving you a heads up? Phill Graham Doctoral Candidate Georgia Tech |
|||
|
|
Pavement Pounder |
I should be more clear here. Does someone with a pre 96 Factory manual tell me if the LED lines for the pre-consult diagnostic are 5v or 12v TTL? I built my box using 12v LEDs, and have yet to get the computer to light them, and am thinking I need replace them with 5v LEDs. Thanks! Phill Graham Doctoral Candidate Georgia Tech |
|||
|
|
Moderator N4W Card Holder  Ultimate N4Wheeler  |
I didn't even think about that...
I'll try to find the specs on the ones I used. Will   |
|||
|
|
Pavement Pounder |
Did you ever find those specs? That would be extremely helpful. Thanks! Phill Graham Doctoral Candidate Georgia Tech |
|||
|
|
New Member |
Do both of the lights light up when you are in bulb check mode ( when the key is on and all the lights are on in the speedo )?
|
|||
|
|
Moderator N4W Card Holder Ultimate N4Wheeler |
Crap I kept the packages for everything but I took it to work so I won't be able to get the numbers until Monday.
obewan, yes, both should light up. You won't be able to switch modes with the engine off though. At least that's how mine works. Will |
|||
|
|
Moderator N4W Card Holder Ultimate N4Wheeler |
I'm pretty sure these were the parts...
http://www.radioshack.com/product/index.jsp?productId=2...ed&parentPage=search http://www.radioshack.com/product/index.jsp?productId=2...ed&parentPage=search They are 12v, with a resistor inside. It doesn't mention the resistor on the web site though. I haven't looked at wiring diagrams, but I suspect there's a fuse involved somewhere. Will |
|||
|
Dirt Road Driver |
Check out this page? Yours was made in '86? http://www.autozone.com/az/cds/en_us/0900823d/80/17/ae/.../repairInfoPages.htm Looks like you have a similar ECU box as my 4 banger. I'd be real careful with that toggle switch on the side. |
|||
|
| Previous Topic | Next Topic | powered by eve community | Page 1 2 3 |
 | Please Wait. Your request is being processed... |
|
|||
| Site | Nissan4wheelers.com Forum | ||
| Servlet | eve2da002 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Default Style" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
