Hey guys, my sister's camry is having some problems, wondered if I might get you to toss some ideas my way. It runs, but sputters really bad right when you push on the gas. It barely works until you get it up to higher rpms, then it goes a little better. It is pretty old, and just came out from LA last October. I am going to try things like plugs and wires, filters, etc. but was wondering what you all thought. Any ideas would be appreciated.
It Never Ends...
BUT if you let someone borrow your junk, wifey or girlfriend or mom or dad, and they don't know how to drive a rig with a locker, when they hit ice/snow they is so gonna crash that mofo! -Rondo
Posts: 1436 | Location: Denver, CO, USA | Registered: October 27, 2003
Is there an easy way to pull the codes, like on my truck? No CEL, so there may be nothing there, but who knows.
It Never Ends...
BUT if you let someone borrow your junk, wifey or girlfriend or mom or dad, and they don't know how to drive a rig with a locker, when they hit ice/snow they is so gonna crash that mofo! -Rondo
Posts: 1436 | Location: Denver, CO, USA | Registered: October 27, 2003
EFI 4 cyl toy's usually have a grey connector that you pop the top and jumper the E1 and T1 pins then your check engine light flashes your code when you turn on the igition write down the number of flashes and check to see what it is.
BUT if you let someone borrow your junk, wifey or girlfriend or mom or dad, and they don't know how to drive a rig with a locker, when they hit ice/snow they is so gonna crash that mofo! -Rondo
Posts: 1436 | Location: Denver, CO, USA | Registered: October 27, 2003
N4W follows the Tread Lightly philisophy and asks that members do the same. Let's keep our trails open! For more information on Tread Lightly, visit their website!
