Hi,
I adopted an 85 cherokee 2dr with a 3" Procomp lift from a friend that gave up on it. It's a 4cyl carb and he swapped it to a 93 4cyl Fi; however he did not finish the wiring part of it. Now I need some info/help on how to do this kind of stuff. All that's left to do is the Fi wiring. Thanks in advance,

What exactly do you need to know?

Do you have the wiring harness and ecu?

I have the wiring harness and a bunch of extra parts with it. everything is installed except the wiring harness. the original harness is still in place. Thanks,

I am looking for some tips on how to get the Fi wiring to work.

Got it working last night . Took me and my dog 4hrs to do the swap. the dashboard wiring was a pain in a$$, but other than that with a good wiring diagrams everything went smooth. Oh! I learned that all of the ground wires has to be connected to good grnd. Later,

cherokees are really nice. They are cheap and can be built on the cheap also.

quote:

Originally posted by LordBiotree:
cherokees are really nice. They are cheap and can be built on the cheap also.

They also have some wierd problems that come up from time to time

It idles, but I think I need to change the fuel pump. It's not getting enought fuel. I need to find the psi rating for the 2.5 fi motrt. Later,

A fuel injected motor usually runs around 30-40psi and gets regulated down at the engine.

Thanks,