awesome. Just what I wanted to hear! Someone said they thought someone ELSE said that you could take off the carpet liners and get down in there and pound it out. . . we'll see. But more than likely will be doing some herculean body work, in the form of a roll-on!
Take up the plastic door sills and make an access hole. You can pry most of it out that way.
The way I did it was to bend a piece of thin steel rod (a bucket handle) into a "C" shape. I tack welded the C to the dent, then pried it out, bearing against the door sill. Protect the door sill with a strip of wood to prevent denting the edge.
Another way is to use an auto-body slide hammer.
Once you get it close, bondo it and build some sliders.
N4W follows the Tread Lightly philisophy and asks that members do the same. Let's keep our trails open! For more information on Tread Lightly, visit their website!
Someone said they thought someone ELSE said that you could take off the carpet liners and get down in there and pound it out. . . we'll see. But more than likely will be doing some herculean body work, in the form of a roll-on!
posted at the same exact time.
