|
|
|
|
|
Go
|
New
|
Find
|
Notify
|
Tools
|
Reply
|
|
|
Administrator N4W Card Holder  Ultimate N4Wheeler  |
The 24" braided line I have is officially too short.
I need a 27" one. It's been so long since I replaced it and I can't really tell just by looking, but are both ends of the soft line a male end? What's the Nissan brakeline thread pitch again? I think it's a 10x1, but I don't remember.  1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
||
|
Ultimate N4Wheeler |
 M10 x 1.0..................... "Climate change is no longer science. It's politics... Climate change is also about power. Power to control.... It's about who gets to decide: how much energy we will have... where that energy will come from... what it will cost... It's about simulations, scenarios and monsters conjured up by computer models that should never be used to chart government policy -- especially on matters that will profoundly affect our livelihoods, living standards, life spans and dreams of a better future. "So hold onto your wallets, and hope you can hold onto your homes, cars and jobs. You're about to be put on a wild political roller coaster." - Paul Driessen, TownHall.com |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
So uh....male ends on both ends?
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
N4W Card Holder Off-Road Warrior  |
Andy, I need one too, so when your ready to get one, can you get two? I can get you the money before or after.
Just placed my H233b under my truck, thought the top connection was female, then the bottom is the T block with the two connections to the hardline. Am I thinking of the same line or a different line. Bob ---------------------------------------------------------  04 SAS Frontier, 8" Lift Total, 35x12.5x15 MT's with Staun Internal Beadlockers, Calmini Crawler Gears, ARB Front & Rear Air Lockers. |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
No, you might be right on that.
I'll check into two. 1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
N4W Card Holder Off-Road Warrior |
Top connection at the clip is female, then the T Block has 2 female connection to the hardlines with the one bolt hole to the mounting bracket.
--------------------------------------------------------- 04 SAS Frontier, 8" Lift Total, 35x12.5x15 MT's with Staun Internal Beadlockers, Calmini Crawler Gears, ARB Front & Rear Air Lockers. |
|||
|
|
Pavement Pounder |
when i bought my 27 incher from AC, top was female block and bottom was male
99' V6 fronty skids-suspension-lights-rims/tires-otherstuff |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
Thanks
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
N4W Card Holder Off-Road Warrior |
Did you look at yours? From that I saw, the hose was attached to the T block, didn't look like you cold unscrew it.
--------------------------------------------------------- 04 SAS Frontier, 8" Lift Total, 35x12.5x15 MT's with Staun Internal Beadlockers, Calmini Crawler Gears, ARB Front & Rear Air Lockers. |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
I'll have to get under it.
1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
Administrator N4W Card Holder Ultimate N4Wheeler |
Gumy, AC has the bolt in replacement, but it's expensive.
27" thingy Still want to go forward? 1998 Frontier 4x4, 2002 Xterra 4x4, and Z28 street rocket Pass here and go on. You're on the road to heaven - Kerouac |
|||
|
|
N4W Card Holder Off-Road Warrior |
Hey,... I won a $50 Gift Cert at GoneMOAB for 4x4parts.com. I know what I can use it on now. Thanks for the link, I will order my own.
Andy, do you want me to order 2 to save on shipping? --------------------------------------------------------- 04 SAS Frontier, 8" Lift Total, 35x12.5x15 MT's with Staun Internal Beadlockers, Calmini Crawler Gears, ARB Front & Rear Air Lockers. |
|||
|
NISSAN4WHEELER |
OK, The rear brake line fittings are all female. I will be ordering one soon also.
There's a local place in jax which manufactured D.O.T approved brake lines. I'm going with them, probably be about half the coat of a/c. The brake hose is only like $5-7 a foot. The brake fittings are expensive because of brass prices 1995 KC XE-V6 4x4. |
|||
|
|
NISSAN4WHEELER |
I have another question.
How long are the stock front brake lines? 1995 KC XE-V6 4x4. |
|||
|
Wheeler |
I am thinking you could check with Sumit Racing Earls perfomance brake stuff
2WD Frontier Converted to 4X4 Soon to be SAS'ed  |
|||
|
| Previous Topic | Next Topic | powered by eve community | Page 1 2 |
 | Please Wait. Your request is being processed... |
|
|||
| Site | Nissan4wheelers.com Forum | ||
| Servlet | eve2da002 | ||
| Version | 1.2.22 build 9062 | ||
| Module | Forums 4.0.3 | ||
| Stylesheet | "Default Style" | ||
| Wordlet Set | "Default Wordlet Set" | ||
|
