Just talked with Steve ( great guy) and it sounds great... I can't wait till I get it!

95 WD-21 Video system- otherwise stock.
95 D-21 with some trail goodies!Nissan - Infiniti
Tony Stewart didn't hit me!

is it for real though?

It isn't the signatre powdercoat blue, the IA and PA dont have any splines, and there doesnt appear to be a mounting point on the CL for th Tie Rods.

just wondering if it will be pushed back unitl 20**

Nah, they've been working on it for a while.. and the parts are SO similar to the Xterra/D22 setup that theres very little that has to be done to put out a D21 kit.

Its gotta be for real..


BEEFYJames Fabrication - Custom Fabricated for Use and Abuse

Nissanboy, there are no splines on an Idler arm, and the tierods go into the arms themselves, not the CL. That's the Calmini design.



1998 Frontier 4x4 seriously built
2002 Xterra 4x4 still stock
Please help STOP urban sprawl!

thanks for clearing it up. just wondering!

Also, the powdercoating cannot be applied evenly every time so there was some issues with that. That's why it's not powdercoated...from what I heard.

95 WD-21 Video system- otherwise stock.
95 D-21 with some trail goodies!Nissan - Infiniti
Tony Stewart didn't hit me!

Got mine ordered today

Oh crap I didn't even think they were taking pre-orders. Well in that case I'll be placing mine too.


"It's Amazing I won. I was running against peace, prosperity, and incumbency." -- George W. Bush, June 14th 2001 - Speaking to Swedish Primer Minister unaware a live T.V. camera was still rolling.

I ordered mine too! Can beat that price, sheet, the stock steering linkage almost cost that much!

Mick

95 Pathfinder SE

http://members.cardomain.com/mickb

I WANT!!!! *savesavesavesave*


N.W.O.R.C. Member
33x10.50" Swampers, 3" TM BL, Warn Hubs
2.5" coils and t-bar match
RS5000's/steering stabilizer, NO swaybars
MSD 6 Offroad Ignition, K&N, DynoMax, Optima, PIAAs, Yak racks and more
See me @
http://members.cardomain.com/laguna1
"Roads? Where we're going, we don't NEED roads...."

I guess it is cool for the ifs crud, but I like sas for the fact that you get top notch steering and a real lift of height!

quote:

---

Originally posted by TF&J:
I guess it is cool for the ifs crud, but I like sas for the fact that you get top notch steering and a real lift of height!

http://sc.communities.msn.com/tn/13/D0/TerenceFrontierandhispics/1/99.jpg http://bbs.off-road.com/wwwthreads_uploads/53-496900-moonguywelder.gif

---

So what are you running on your Frontier?

I have a few questions for Steve (CalMini):

Will the stering system work for all (W)D21 models? Since 86.5-92 trucks have a smaller tapper on the tierod ends, will the newer models (93-97) which have a larger tapper be able to use the same steering system? Or do you have two sets of idler and pitman arms for the different models?

Mahalo in advance.

Hey thats a really good question HH, I have an early '93 HB and I just placed my order for the system today.....hhhhhmmmmm


"It's Amazing I won. I was running against peace, prosperity, and incumbency." -- George W. Bush, June 14th 2001 - Speaking to Swedish Primer Minister unaware a live T.V. camera was still rolling.

Guys, our vendors don't have a lot of time to check boards. You might be best served to pick up the phone and call their 800 number and ask the question. Please post what you find out.



1998 Frontier 4x4 seriously built
2002 Xterra 4x4 still stock
Please help STOP urban sprawl!