Most front bumpers all look the same - basically a variation of an ARB. Most of them are also butt ugly.

The TJM w/bars looks great IMO, but is notoriously flimsy.

But yeah, there are a few out there...


Heavily Modified 2001 SE 6cyl 5spd 4x4 Solar Yellow

The spring perch skids are a good idea, as well as the shock relocation mounts. Do the X and frontiers have the same rear end set up? I think they do. I'll design a set for a frontier, then if someone would EMAIL me and volunteer to test out the fitment for an X that would be awesome!
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

I have both - a Frontier and an X.


1998 Frontier 4x4, 2002 Xterra 4x4, 1983 280ZXT, and a ratty old Sentra
Remember, Grow the Nissan Community and stand up for ORV user rights!
Card Carrying M.E.S.A Member (Modified Easterly SWANKy Associates)

Drat,
I have a guy with an 01' Frontier here, I'll design what I can for it, and work something out with you on testing some products on the X...is that cool? As for your tube fenders...would you like complete replacement fenders or tube protection over the stock ones? I'm trying to deside what I want to work on. Thanks!
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

On my pickup, I'd consider full replacements - One of my fenders is demolished anyways (see my sig pic), keeping in mind that the parking light/blinker combo mounts to the fender...that'll be the tricky part.


1998 Frontier 4x4, 2002 Xterra 4x4, 1983 280ZXT, and a ratty old Sentra
Remember, Grow the Nissan Community and stand up for ORV user rights!
Card Carrying M.E.S.A Member (Modified Easterly SWANKy Associates)

Tube fenders. Chris likey that idea.

yes, but what about including a replacement turn signal light...like LED maybe as an option? Do 2wd frontiers have the same fenders as the 4wd?
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

The fenders are a bit different between 2wd and 4wd, but not much....98-00 frontiers use a different assembly than the '01+.


1998 Frontier 4x4, 2002 Xterra 4x4, 1983 280ZXT, and a ratty old Sentra
Remember, Grow the Nissan Community and stand up for ORV user rights!
Card Carrying M.E.S.A Member (Modified Easterly SWANKy Associates)

quote:

---

Do the X and frontiers have the same rear end set up?

---

The Xterras are all spring-under, and the 4x4 Frontier is spring-over.

Brent

quote:

---

Originally posted by BoarderPhreak:
The TJM w/bars looks great IMO, but is notoriously flimsy.

---

Huh? The T17 WITHOUT bars like I have might be somewhat flimsy compared to the ones with bars, but it's plenty stout enough. I'd put the T15 with bars on par with the ARB or Calmini no sweat.

Brent

Here is another vote for pathfinder belly skids...

91 Path
N.W.O.R.C. Member

Interior Roll Cage for my '01 Fronty CC 4x4 SAS!!! :PLEASE!!! OR just the raw bent pieces that my mechanic or myself could weld in. )PLEASE????? Later...

'01 CC SE-V6 w/stock LSD My Web Page
Where I workI know... I know...
22,000 miles...SAS coming along SLOWLY but Surely. Almost done, just need to get knuckles cut/rotated.

If you give me EXACT dimensions, I can do it for you.
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

Not that I need it, but I bet there are a few out there that would buy a spool if it were available for the H233B.

Lator.....

That would be cool...I have to check into that!
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.