I go to Dallas very often...a few times a month. Shoot me an email at shortysoffroad@yahoo.com and we can talk about some details and possibilities. I also have sliders now available. I'm working on getting some pictures up. They are weld on, all tube, super beefy.
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

You Got It, I'll send you an e-mail very soon.

2001 S/C 4x4 Frontier KC "Here Comes Trouble"

A SAS kit for the X/Frontier would be cool. It's enough work as it is...


Heavily Modified 2001 SE 6cyl 5spd 4x4 Solar Yellow

quote:

---

Originally posted by Desert Rat:
D21's apparently in a December/January timeframe. I don't know if the D21 piece will fit a D22 or not, but the D22 SAS kit is also in the works.

Hey, they may take a while to get stuff out, but when they do, it's good quality product.

---

When I called Calmini last week I spoke to someone named Dave(I think). He said not to expect the kit until the spring and it would only be for the Hardbodies, and the Pathfinders would be a completly seperate kit. He was quite tight lipped but it sounded as if the Pathfinder kit might be a 4bar link (steve also said something on the board about that).

Maybe you know something different, I hope you are right.

________
95 Pathfinder 5spd, A-Arm lift, Sway-a-ways, Idler arm brace, Rancho RS9000x's, Ford coils, Warn Hubs, 31x10.5s on 15x7 Black steelies

SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES! SKID PLATES!

I'm actually headed outside to work on a set on a 93 Hb...are they different than a pathy?I should have a pathy to try them on soon.
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

ok, skid plates have been started on a 93' Hb extended cab v-6. The 4 cylinder models will be a little different. The crossover pipe for the exhaust and the front diff hang below the crossmembers so I am keeping the skids flat and tight to those with minimal room for deflection. The skids will be made out of 3/16" steel so they shouldn't be denting or anything of the sort! I'm working on keeping drilling down to a minimum however, some holes will need to be drilled in the x-members. I'm hoping to have the skids done in three pieces for the belly to keep handling a bit easier as these things will be beefy! A gas tank skid will be available as well as a rear diff skid. If I recall, this should fit a path finder as well, but I need to check to make sure. I will have two gas tank skids available for the different sized gas tanks. My 86.5 HB 4 banger has a smaller one than my 93' HB v-6. I'll keep you all updated on the skid progress. After the HB's, the X and Frontier skids will be developed.
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

Speaking of gas tanks, a kit to lift the tank up after a body lift would be sweet. Then it wouldn't be so close to the ground and rocks.

----------------------
1994 Hardbody Reg. Cab

I'm now taking donations for the Calmini Steering. Send all your cash to...

I had a belly skid made recently and it didn't fit due to the exhaust since I have a V6. Apparently, it fit a 88 V6 Pathy, but not mine

Mr. Will

Give me ambiguity or give me something else.

Skids for the rear diff on a Hardbody will probably be different than one on a Pathy because of the spring mounts. Plus the models with rear anti-lock that is mounted on the third member are different than those without.

I am getting a 95 Pathy in a few weeks to look at, so I should be able to see from there.
Greg

www.shortysoffroad.com
shortysoffroad@yahoo.com
Nissan products on the way!
Go to the website for some pics of my truck.

quote:

---

Originally posted by 94hardbodyrig:
Speaking of gas tanks, a kit to lift the tank up after a body lift would be sweet. Then it wouldn't be so close to the ground and rocks.

----------------------
1994 Hardbody Reg. Cab

I'm now taking donations for the Calmini Steering. Send all your cash to...

---

Don't quote me on it, but I'm pretty sure that Mike from Automotive Customizers (4x4parts.com) is working on that specifically!! Pretty cool, huh?!? Later...

'01 CC SE-V6 w/stock LSD My Web Page
Where I workI know... I know...
22,000 miles...SAS coming along SLOWLY but Surely. Now, I'm REALLY Almost done!! All I'm waiting for is my PMP custom flattop knuckle for x-over steering. Should be done by 10-20-03!!!

I lifted my tank without any kit, it is very easy to do, and took around $5.00 in parts. Just get some longer bolts and some spacers, and you will need a drill and a couple of hours of the day.

OHHHH!!! SKID PLATES!!!!

The HB V6 should fit the Pathfinder V6s...but I have a auto tranny so I don't know that it will fit mine.

But if you can get me skid plates for a reasonable price...

quote:

---

Originally posted by TF&J:
I lifted my tank without any kit, it is very easy to do, and took around $5.00 in parts. Just get some longer bolts and some spacers, and you will need a drill and a couple of hours of the day.

---

You should throw up a little quick "How-To" on the board sometime. Just my $.02. Later...

'01 CC SE-V6 w/stock LSD My Web Page
Where I workI know... I know...
22,000 miles...SAS coming along SLOWLY but Surely. Now, I'm REALLY Almost done!! All I'm waiting for is my PMP custom flattop knuckle for x-over steering. Should be done by 10-20-03!!!