Wheeler

|
You can swap in a LSD equipped Nissan rearend.
97 Nissan HB. EX. Cab 4x4.....4cyl, 5spd, 4.6 gears, Warn Prem. Hubs, 3in BL., 3in. SL, 33x12.50 BFG MTs, Hoohaa CL, Steering Stab, Chevy Tow Hooks, Dual Exhaust, relocated ECU, onboard air compressor, Smittybilt XRC8 winch, Warn Transformer
|
| |
| Posts: 291 | Location: ALABAMA | Registered: March 24, 2006 |    |
|
Pavement Pounder
|
Thanks! Is there any way to tell which trucks had that option?
"Dogs Bark. Waves pound the beach. I beat people up." -- Mohamad Ali
|
| |
| Posts: 27 | Location: tampa, fl | Registered: June 28, 2003 |    |
|
Wheeler
|
rear disc brakes, and orange "LSD" sticker on the diffy.
92 pathy- 3 link front, long arm rear, front EB 44 with ox locker and full chromo shafts, rear with full carrier detroit. 4.88/4.9 gears front and back. Currently on 35's.
|
| |
| Posts: 179 | Location: LaPorte, IN | Registered: November 21, 2006 |    |
|
NISSAN4WHEELER

|
There are no C200 rear disk Nissan Hard bodys. Yes they do make a LSD for a C200. Automotive customizes sell a C200 LSD. Also a R200A lsd will drop right in. If AC does not have one in stock. Ask a Nissan dealer for a Nismo parts catalog. Nismo north America sells LSD carriers. When you buy the carrier you need to but 2 new carrier bearings and outer races. These are about $30 a pice. When I installed my Calmini R200LSD It's much cheaper to just but the new bearings and press them in. I only found once source for a proper carrier bearing removal tool. They were asking 180+ shipping. I don’t have access to my computer with Nissan FAST to give you the exact part number you need. Here's the link to A/C LSD http://www.4x4parts.com/public_html/shop/index.php3?pag...a5003fcb50daeab47bfc
1995 KC XE-V6 4x4.
|
| |
| Posts: 4582 | Location: U.S.A,Tallahassee/Jacksonville, Florida | Registered: June 17, 2003 |    |
|
Wheeler
|
is there a locker for 2 wd trucks?? or a gizmo that would lock both axle to keep power to them??
tomas.hayden@gmail.com
|
| |
| Posts: 295 | Location: cincinnati,ohio | Registered: March 17, 2006 |    |
|
NISSAN4WHEELER

|
There is no mechanical locker for a C200 or H190 axle. Only mechanical lockers are made for the H233B. I've did a lot of research before I installed my front LSD. I found no manufacture of any traction aid other than the LSD offered by nissan sold through A/C and calmini. The LSD is expensive because it's imported from europ/japan
1995 KC XE-V6 4x4.
|
| |
| Posts: 4582 | Location: U.S.A,Tallahassee/Jacksonville, Florida | Registered: June 17, 2003 |    |
|
Wheeler
|
i have an 88 nissan 2wd 5 speed trans reg cab reg bed.. what rear end is in it??
tomas.hayden@gmail.com
|
| |
| Posts: 295 | Location: cincinnati,ohio | Registered: March 17, 2006 |    |
|
Wheeler
|
thanks
tomas.hayden@gmail.com
|
| |
| Posts: 295 | Location: cincinnati,ohio | Registered: March 17, 2006 |    |
|