I have the Warn manual hubs on the Car50 and need to know what the bolt length, pitch, diameter are required to get some black allen head bolts.

I think they are M8 1.25 pitch but am unsure of what length I need.

pull one out and measure it?

I was hoping someone had the quick answer. So I could call the places. I have tones of hub bolts and it is hard to measure the length as the stock bolts are studs. I will have to measure the hub depth and figure it out.

30mm

Remind me on the AZ run and I will hook you up with a set of grade 12.9 allen heads. I bought a bulk pack a while back and sold a bunch of the excess, but still have a set I can spare. Say the word and they are yours, dude.

They are not plated, so they need to be painted. They are tough enough to really put some stink on.

Like mentioned above 30mm.

Some extra info from our club site.

Replacement Bolts for Warn Manual Hub Kit P# 029091:

STEEL HEX CAP SCREW GRADE 12.9
M8 x 30MM PLAIN

or

Gr 12.9 M8X40mm Metric Socket Head Capscrews (Coarse Thread)
Grainger Catolog # PFSCSLS9M8-40

And from Offroad X:

McMaster.com part #91303A195 is what everyone uses to replace them, though 91290A442 seems to be the same thing but in black instead of blue finish